Cinipol™ Red DR1P
Cinipol Red DR1P is a yellowish shade red with good lightfastness and excellent heat resistance. Where “Halogen free” solutions are required, Cinipol Red DR1P is the best product. This colorant is specially of interest for Polyamide 6/ Polyamide 66 fiber applications.
-
C. l. NameSolvent Red 179
-
C. I. No.564150
-
CAS No.89106-94-5
-
Chemical ClassPerinone
Full Shade in PS (0.05%)
1/3 ISD in PS
(0.15% + 1.0% TiO2)
-
Physical Data
-
Regulatory Compliance
-
Heat Resistance
-
Solubility
-
Fastness Properties
-
Applications
| Bulk Density (Kg/L) | 0.32 |
| Bulk Volume (L/Kg) | 4.6 |
| Melting Point (°C) | 255 |
| Sublimation Temperature (°C) |
350 |
| FDA | - |
| EN71-3 | Y |
| EN71-9 | Y |
| APME AP89/1 | Y |
| CONEG EC94/62 | Y |
| FPL | - |
| China GB9685 | Y |
|
|
% Concentration + % TiO2 (1/3 ISD) | Heat Resistance (°C) |
| PET | 0.113% + 1% TiO2 (1/3 ISD) | 320 |
| PMMA | 0.155% + 1% TiO2 (1/3 ISD) | 300 |
| PC | 0.155% + 1% TiO2 (1/3 ISD) | 350 |
| ABS | 0.580% + 4% TiO2 (1/3 ISD) | 300 |
| PS | 0.300% + 2% TiO2 (1/3 ISD) | 300 |
| PA6/PA66 | 0.140% + 1% TiO2 (1/3 ISD) | 300 |
| Water | Acetone | Ethanol | Ethyl acetate |
Toluene | Heptane | Polyethylene glycol (PEG) | MMA |
| Insoluble | <5g/l | <5g/l | <5g/l | <5g/l | Insoluble | <5g/l | <5g/l |
| % Concentration + % TiO2(1/3 ISD) | Light Fastness | Weather Fastness Transparent 0.05% (3000 hrs) | Migration Transparent 0.05% | |
| PET | 0.113% + 1% TiO2 (1/3 ISD) | 3~4 | - | - |
| PMMA | 0.155% + 1% TiO2 (1/3 ISD) | 4 | 2~3 | 4~5 |
| PC | 0.155% + 1% TiO2 (1/3 ISD) | 5 | 2~3 | 4~5 |
| PS | 0.300% + 2% TiO2 (1/3 ISD) | 4~5 | 2 | 4~5 |
| PET | ● |
| PBT | ○ |
| PS | ● |
| HIPS | ● |
| ABS | ● |
| PC | ● |
| PMMA | ● |
| POM | ○ |
| SAN | ● |
| PA66/PA6 | ● |
| PES Fiber | ○ |
| ● recommended ○ potential use - not recommended | |
Copyright?2016 先尼科. All rights reserved. Powered by webfoss.
